Pneumatic cylinders according to ISO 64342 with bore size 10mm, 12mm, 16mm, 20mm and 25mm suitable for a wide range of applications in industry.
This is a standard piston rod cylinder available in double and single acting versions.
Standard stroke lengths are listed here - for other stroke lengths please contact us.
Suitable for operation with dry or lubricated air (if lubrication is started it must be continued).
This range of cylinders has a magnetic piston to allow position sensing by means of a reed switch.
ISO 6432 is a dimmensional standard and allows this range to be directly interchangeable with many other makes on the market.
Stainless steel cylinder barrel and piston rod means that this cylinder range is well protected against corosion.
Atex certified cylinder ID: II2G c IIB T4 II 2D c IP65 T125 deg C X is available on request.
Piston forces shown in the table below apply to a working pressure of 6.3 bar
Manufacturer: Aventics (formerly Rexroth pneumatics)
Series: MNI
For atex cylinders or any other information please contact our team at Motivair who will be keen to assist you.
